First Synth Build
  • Hey all,
    I just bought the boards and sourced the parts for an Anushri and I’m excited to get started. I’d like to know where to get info on programming the ATMega328. Is there a tutorial or a thread on this? Thanks for your help.

  • The commands are:

    avrdude -B 100 -V -p m328p -c avrispmkII -P usb -e -u -U efuse:w:0xfd:m -U hfuse:w:0xd4:m -U lfuse:w:0xff:m -U lock:w:0x2f:m

    avrdude -B 1 -V -p m328p -c avrispmkII -P usb -U flash:w:anu_0.91.hex:i -U flash:w:anu_bootloader.hex:i -U lock:w:0x2f:m

    You can find the firmware files here.

  • And you will need a programmer

  • Ok now it is starting to make sense. Thanks very much!