chapelierfou

Clouds bug : Blend Parameter is not saved
i didn’t recalibrate (i have nothing plugged in the V/Oct input), but if i can still trust my ears, it’s definitely adding or subtracting 23 st.

Comment by chapelierfou May 2017 permalink
Clouds bug : Blend Parameter is not saved
Well, there is one minor tweak that could make it perfect : the pitch knob goes from -23st to + 23 st. -24 to +24 would be much better…

Comment by chapelierfou May 2017 permalink
Clouds bug : Blend Parameter is not saved
WOW ! Massive thanks for this !!

Comment by chapelierfou May 2017 permalink
Clouds bug : Blend Parameter is not saved
I do want a wav file since i’m not really fond of the Parasite firmware (which was modified by Matthias for me). Ideally i’d love a mix of both (regular firmware with pitch quantized to semitones) but i’m not sure you’d consider this option. Tha…

Comment by chapelierfou May 2017 permalink
Clouds bug : Blend Parameter is not saved
That’d be nice, thank you !

Comment by chapelierfou May 2017 permalink
Yarns Listening to MIDI CCs even with Remote Control OFF
I see. Then i’d love to see an option to disable incoming CCs, maybe in a next firmware ? Thanks !

Comment by chapelierfou May 2017 permalink
Clouds pitch quantize ?
Je viens de voir ton message. J’ai des petits soucis avec ce firmware.

Comment by chapelierfou May 2017 permalink
Clouds pitch quantize ?
Thanks. The idea is to keep it as simple as possible, without adding an external quantizer. Someone very nice is making me a custom firmware.

Comment by chapelierfou April 2017 permalink
Matthias Puech - Threshold
Haha, congratulations. The previews sound promising.

Comment by chapelierfou February 2017 permalink
Ableton & Yarns problem
http://mutable-instruments.net/forum/discussion/8377/yarns-changing-microbrute039s-pitch-bend#Item_9 ?

Comment by chapelierfou February 2017 permalink
Yarns changing microbrute's pitch bend
Wonderful. Installing asap.

Comment by chapelierfou February 2017 permalink
Yarns changing microbrute's pitch bend
Any news on this one ?

Comment by chapelierfou February 2017 permalink
Yarns 3M mode ?
I actually didn’t test the new firmware for now, so there is no way to make 3 Mono Parts + 1 clock/1CV ?

Comment by chapelierfou February 2017 permalink
Yarns changing microbrute's pitch bend
Thanks a lot.

Comment by chapelierfou February 2017 permalink
Yarns changing microbrute's pitch bend
Yarns’ output whenever i change an output channel in Live (The channel, 9 in this case, is always the previous selected channel) : 20:12:58.968 From Pro40 MIDI Pitch Wheel 9 -8128 20:12:58.969 From Pro40 MIDI Pitch Wheel 9 -8128 20:12:58.970 Fr…

Comment by chapelierfou February 2017 permalink
Yarns 3M mode ?
Didn’t see the new firmware. Nice !

Comment by chapelierfou February 2017 permalink
Frames channel 1 different from the others
Many merci !

Comment by chapelierfou June 2016 permalink
Can't calibrate Anushri properly
Ok ! Hope it will work ! Thanks for the help.

Comment by chapelierfou May 2016 permalink
Can't calibrate Anushri properly
So…i did replace the trimmer. Nothing changed. The smallest octave i can get sounds like it’s 13 semi tones.

Comment by chapelierfou May 2016 permalink
Can't calibrate Anushri properly
merci

Comment by chapelierfou May 2016 permalink
Can't calibrate Anushri properly
I’ll do that. Linear or log doesn’t matter, does it ?

Comment by chapelierfou May 2016 permalink
Anushri Euro Panel Waiting List
@synnys, sent you a PM a few days ago.

Comment by chapelierfou May 2016 permalink
streams: cv control over shape?
i was about to post the same question about the possibility of modifying streams to have cv control over shape. Sad to read that it won’t happen. This is the only thing i don’t like about the module. Using it as a vca with an external cv contro…

Comment by chapelierfou October 2015 permalink
BRAIDS : Quantize the poly modes inputs ?
Nice, thanks.

Comment by chapelierfou July 2015 permalink
Braids V/oct input, Coarse offset etc. question
Great, thanks.

Comment by chapelierfou July 2015 permalink
Braids V/oct input, Coarse offset etc. question
Well, with the COARSE at minimum it should make the same pitch but 4 octaves down the center position, but it’s not. Anyway, sending 0-10V with COARSE at noon and OCTAVE setting at -1, i feel like covering a nice and musically useful area.

Comment by chapelierfou July 2015 permalink
Braids V/oct input, Coarse offset etc. question
So it means that if i drive Braids with my ES-3 sending voltages between 0 and 10V, i’d better turn the COARSE knob in minimum position, that’s right ?

Comment by chapelierfou July 2015 permalink
Braids V/oct input, Coarse offset etc. question
Ha ! thanks ! You’re so fast to answer !

Comment by chapelierfou July 2015 permalink
Braids V/oct input, Coarse offset etc. question
Well, i sorted out. i am driving it from max/MSP and ES-3 and it appeared that i had an offset that made me confused. i am still a bit confused about the OCTAVE setting, COARSE knob, their relation to incoming voltage and the highest pitch possib…

Comment by chapelierfou July 2015 permalink
BRAIDS : Quantize the poly modes inputs ?
Didn’t see you replies, sorry ! Did you compile it in the end ?

Comment by chapelierfou July 2015 permalink

More Comments

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: chapelierfou
Joined: June 2014
Visits: 35
Last Active: May 2017
Roles: Member